First of all we needed to set up a back drop stand and make sure it is a decent height and that the backdrop covers up everything.
We then have to put a pole through the backdrop so that it will go onto the top of the stand on either side.
After placing it onto the stand you have to tighten it so that the backdrop doesn't fall whilst you are taking pictures and so it won't injury anybody.
After you have rolled the backdrop out we have to place a clip on either side so that the rest of the backdrop doesn't keep rolling out.
After placing weights down on the backdrop to make is straight and to make sure the ends didn't curl, we had to put to more stands up for the flash which is connected to the camera.
We then put both of the light on top on the stand and then took the lid off the light so that it is ready for use.
We put the plug into the socket and made sure all were tucked away so that nobody will trip over them. Once the plug is in the socket we then put the AC cord in the back of the light and then test it to make sure it is working before you start shooting.
Lastly we then put on mini umbrella at the end of the light, so that the flash wasn't too bright on the subject .
